FRONT SEAT ASSEMBLY (for Flat Type) > REASSEMBLY |
| 1. INSTALL FRONT SEAT CUSHION SHIELD LOWER LH |
Install the front seat cushion shield lower LH.
| 2. INSTALL FRONT SEAT CUSHION SHIELD LOWER RH |
| 3. INSTALL RECLINING ADJUSTER INSIDE COVER LH |
Install the reclining adjuster inside cover LH (upper) with the screw.
| 4. INSTALL RECLINING ADJUSTER INSIDE COVER RH |
| 5. INSTALL RECLINING ADJUSTER INSIDE COVER LH |
Install the reclining adjuster inside cover LH (lower) with the screw.
| 6. INSTALL RECLINING ADJUSTER INSIDE COVER RH |
| 7. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Install the seat cushion pad to the seat cushion cover.
Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
| 8. INSTALL FRONT SEATBACK COVER RH |
![]() |
Install the seatback pad.
Cover the top of the seatback pad with the seatback cover.
Using hog ring pliers, completely install the seatback cover with new hog rings.
![]() |
with Side airbag:
Install the seatback cover bracket with the nut.
![]() |
Attach a rubber wire with new hog rings, as shown in the illustration.
Using hog ring pliers, install new hog rings.
| 9. INSTALL FRONT SEAT HEADREST SUPPORT |
Install the 2 headrest supports.
| 10. INSTALL FRONT SEAT HINGE COVER LH |
Install the seat hinge cover.
| 11. INSTALL FRONT SEAT HINGE COVER RH |
Install the seat hinge cover.
| 12. INSTALL FRONT SEATBACK LOCK SUB-ASSEMBLY RH |
Install the seatback lock assembly with 2 bolts.
| 13. INSTALL FRONT SEATBACK LOCK SUB-ASSEMBLY LH |
Install the seatback lock assembly with 2 bolts.
| 14. INSTALL FRONT SEATBACK SPRING ASSEMBLY |
Install the seatback spring assembly with 4 bolts.
| 15. INSTALL FRONT SEATBACK BOARD RH |
Install front seatback board RH.
Install the clips.
| 16. INSTALL FRONT SEAT BACK SHIELD LH |
Install the seatback shield.
Install the reclining adjuster release handle.
| 17. INSTALL FRONT SEAT INNER RH ARMREST ASSEMBLY |
Install the armrest assembly with the bolt.
Install the armrest cap.
| 18. INSTALL FRONT SEAT TRACK COVER RH FRONT OUTER |
Install the seat track cover front outer with the clip and 2 screws.
| 19. INSTALL FRONT SEAT TRACK COVER RH FRONT INNER |
Install the seat track cover front inner with the clip and 2 screws.
| 20. INSTALL FRONT SEAT CUSHION SHIELD RH |
Install the cushion shield.
Install the screw.
| 21. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH |
Install the reclining adjuster release handle.
| 22. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH |
Install the inner belt assembly with the nut.
Connect the connectors.
| 23. INSTALL FRONT SEAT CUSHION SHIELD INNER RH |
Install the cushion shield inner.
Install the screw.
| 24. INSTALL OCCUPANT CLASSIFICATION ECU |
Check that the ignition switch is off.
Check that the negative battery (-) terminal is disconnected.
![]() |
Install the occupant classification ECU.
Connect the 2 connectors to the occupant classification ECU.