Home › BODY › SEAT › REAR NO. 1 SEAT ASSEMBLY (for Captain Seat Type)

REAR NO. 1 SEAT ASSEMBLY (for Captain Seat Type) > INSTALLATION

for Preparation Click here



1. INSTALL REAR NO. 1 SEAT ASSEMBLY LH
  1. Place the seat in the cabin.

    NOTICE:
    Be careful not to damage the body.

  1. Install the seat.

  1. 7-Passenger RH:
    Install the seat belt anchor plate with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Install the headrest.

  1. When sliding the seat, check that the both sides of the adjuster lock simultaneously.

    HINT:
    Check that the seat adjuster locks.