Home › BODY › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side)

REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side) > DISASSEMBLY

for Preparation Click here



1. REMOVE RH SEAT REAR SEAT RECLINING COVER


    B066946E01
  1. Remove the 2 screws.

  1. Remove the RH seat rear seat reclining cover by pulling it out in the arrow mark direction shown in the illustration.



2. REMOVE LH SEAT REAR SEAT RECLINING COVER


    B066947E01
  1. Remove the 2 screws.

  1. Remove the LH seat rear seat reclining cover by pulling it out in the arrow mark direction shown in the illustration.



3. REMOVE REAR SEATBACK ASSEMBLY LH
  1. Disengage the reclining remote control cable.

  1. Disengage the rear seat lock release strap cable.

  1. Remove the 4 bolts and rear seatback assembly LH.



4. REMOVE REAR NO. 2 SEAT LAP BELT ASSEMBLY CENTER WITH INNER LH
  1. Remove the bolt and rear No. 2 seat lap belt assembly center with inner LH.



5. REMOVE NO. 2 REAR SEAT COVER BEZEL
  1. Remove the 5 screws and cover bezel.



6. REMOVE NO. 2 SEATBACK LOCK CONTROL BEZEL
  1. Remove the screw and No. 2 seatback lock control bezel.



7. REMOVE NO. 2 SEATBACK COVER LH


    B060977
  1. Disengage the claw and remove the 4 headrest supports.

  1. Remove the hog rings and seatback cover together with the pad.

  1. Remove the hog rings and No. 2 seatback cover LH.



8. REMOVE REAR SEAT LOCK RELEASE STRAP ASSEMBLY


    B067127
  1. Remove the nut and rear seat lock release strap assembly.



9. REMOVE REAR SEATBACK CONNECTING LH WIRE
  1. Remove the screw and rear seatback connecting LH wire.



10. REMOVE RECLINING RELEASE HANDLE SUB-ASSEMBLY LH
  1. Remove the nut and reclining release handle sub-assembly LH.



11. REMOVE NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH
  1. Remove the nut and No. 2 reclining adjuster release handle LH.



12. REMOVE REAR SEAT INNER BELT ASSEMBLY LH
  1. Remove the bolt and rear seat inner belt assembly LH.



13. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH
  1. Remove the bolt and rear No. 2 seat inner belt assembly LH.



14. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH
  1. Remove the hog rings and cushion cover together with the pad.

  1. Remove the hog rings and No. 2 seat cushion cover sub-assembly LH.



15. REMOVE LOCUS CABLE LH
  1. Remove the nut and locus cable LH.



16. REMOVE NO. 2 SEAT CUSHION SPRING ASSEMBLY LH


17. REMOVE REAR SEAT STAY SUB-ASSEMBLY
  1. Remove the nut and rear seat stay sub-assembly.