Home › BODY › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type RH Side)

REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type RH Side) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT LEG SIDE GARNISH SUB-ASSEMBLY RH


    B067130E01
  1. Disengage the clips and remove the seat leg side garnish sub-assembly RH.



2. REMOVE REAR NO. 2 SEAT ASSEMBLY RH
  1. Remove the bolt and locus cable RH.

  1. Remove the 2 bolts and rear No. 2 seat assembly RH.

  1. Remove the rear seat headrest assembly RH.