REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type RH Side) > DISASSEMBLY |
| 1. REMOVE RH SEAT REAR SEAT RECLINING COVER |
![]() |
Remove the 2 screws.
Remove the RH seat rear seat reclining cover by pulling it out in the arrow mark direction shown in the illustration.
| 2. REMOVE LH SEAT REAR SEAT RECLINING COVER |
![]() |
Remove the 2 screws.
Remove the LH seat rear seat reclining cover by pulling it out in the arrow mark direction shown in the illustration.
| 3. REMOVE REAR SEATBACK ASSEMBLY RH |
Disengage the reclining remote control cable.
Disengage the rear seat lock release strap cable.
Remove the 4 bolts and rear seatback assembly RH.
| 4. REMOVE REAR NO. 2 SEAT BELT ASSEMBLY INNER RH |
Remove the bolt and rear No.2 seat belt assembly inner RH.
| 5. REMOVE NO. 2 REAR SEAT COVER BEZEL |
Remove the 3 screws and No. 2 rear seat cover bezel.
| 6. REMOVE NO. 2 SEATBACK LOCK CONTROL BEZEL |
Remove the screw and No. 2 seatback lock control bezel.
| 7. REMOVE NO. 2 SEATBACK COVER RH |
![]() |
Disengage the claw and remove the 2 headrest supports.
Remove the hog rings and seatback cover together with the pad.
Remove the hog rings and No. 2 seatback cover RH.
| 8. REMOVE REAR SEAT LOCK RELEASE STRAP ASSEMBLY |
![]() |
Remove the nut and rear seat lock release strap assembly.
| 9. REMOVE REAR SEAT BACK CONNECTING RH WIRE |
Remove the nut and rear seatback connecting RH wire.
| 10. REMOVE RECLINING RELEASE HANDLE SUB-ASSEMBLY RH |
Remove the screw and reclining release handle sub-assembly RH.
| 11. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO. 2 RH |
Remove the nut and reclining adjuster release handle No.2 RH.
| 12. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH |
Remove the hog rings and cushion cover together with the pad.
Remove the hog rings and No. 2 seat cushion cover sub-assembly RH.
| 13. REMOVE LOCUS CABLE RH |
Remove the nut and locus cable RH.
| 14. REMOVE NO. 2 SEAT CUSHION SPRING ASSEMBLY RH |
| 15. REMOVE REAR SEAT STAY SUB-ASSEMBLY |
Remove the nut and seat stay sub-assembly.