Home › RESTRAINTS › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY

REAR CENTER SEAT OUTER BELT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 REAR SEAT OUTER BELT ASSEMBLY (for 8-Passenger)

HINT:
Refer to the instructions for disassembly of the rear No .1 seat assembly (for center seat) (Click here).

  1. Remove the rear seatback board.

  1. Remove the rear seat shoulder belt cover.

  1. Remove the 2 bolts, 2 nuts and No. 1 rear seat outer belt assembly.



2. REMOVE 3 POINT TYPE NO. 2 REAR SEAT BELT ASSEMBLY
  1. Remove the roof headlining.

    HINT:
    Refer to the instructions for removal of the roof headlining (Click here).

  1. Remove the 2 bolts, 2 nuts and 3 point type No. 2 rear seat belt assembly.