Home › BODY › EXTERIOR › REAR DOOR WINDOW FRAME MOULDING

REAR DOOR WINDOW FRAME MOULDING > REMOVAL

for Preparation Click here



1. REMOVE REAR DOOR WINDOW FRAME MOULDING


    B067634
  1. Remove the screw.

  1. Using a heat light, heat the rear door window frame moulding between 40 to 60 °C (104 to 140 °F).

    NOTICE:
    Do not heat the rear door window frame moulding excessively.

  1. Slide the rear door window frame moulding upward to remove the moulding.

    NOTICE:
    If reusing the moulding, take care not to damage the rear door window frame moulding.



2. REMOVE REAR DOOR WINDOW REAR FRAME MOULDING


    B067636
  1. Remove the screw.

  1. Using a heat light, heat the rear door window rear frame moulding between 40 to 60 °C (104 to 140 °F).

    NOTICE:
    Do not heat the rear door windou rear frame moulding excessively.

  1. Slide the rear door windou rear frame moulding upward to remove the moulding.

    NOTICE:
    If reusing the moulding, take care not to damage the rear door windou rear frame moulding.