Home › BODY ELECTRICAL › AUDIO / VISUAL › WINDOW GLASS ANTENNA WIRE

WINDOW GLASS ANTENNA WIRE > INSPECTION

for Preparation Click here



1. INSPECT WINDOW GLASS ANTENNA WIRE


    BE04029E01
  1. Inspect the wind glass antenna wire.

    NOTICE:
    When cleaning the glass, use a soft, dry cloth, and wipe the glass in the direction of the wire. Take care not to damage the wires. Do not use detergents or glass cleaners with abrasive. When measuring voltage, wind a piece of tin foil around the top of the negative probe and press the foil against the wire with your finger, as shown in the illustration.



    E032576
  1. Check the continuity, at the center of each antenna wire, as shown in the illustration.