Home › BODY ELECTRICAL › AUDIO / VISUAL › WINDOW GLASS ANTENNA WIRE

WINDOW GLASS ANTENNA WIRE > REPAIR

for Preparation Click here



1. REPAIR WINDOW GLASS ANTENNA WIRE


    BE00150E01
  1. Clean the broken wire tips with a grease, wax and silicone remover.

  1. Place the masking tape along both sides of the wire to be repaired.

  1. Thoroughly mix the repair agent (Dupont paste No. 4817).



    BE00151E01
  1. Using a fine tip brush, apply a small amount of the mixture to the wire.

  1. After a few minutes, remove the masking tape.

  1. Do not repair the defogger wire for at least 24 hours.