Home › BODY › SEAT › SEAT MEMORY SWITCH

SEAT MEMORY SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH


    B067483E01
  1. Using a screwdriver, disengage the clip and claw, and remove the garnish.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    B062416E01
  1. Using a screwdriver, disengage the 3 claws and remove the bezel.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    B067486E01
  1. Remove the screw.

  1. Using a screwdriver, disengage the clip and claw, and remove the armrest base panel upper together with the switch.

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect the connector.

  1. Remove the 3 screws and switch from the armrest base panel upper.

  1. Using pliers, remove the 2 pins and armrest.



4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    B067922
  1. Remove the 3 screws and back frame plate.



    B067485E01
  1. Remove the 2 cushion rubbers.

  1. Remove the 2 screws and the clip A.

  1. Using a screwdriver, disengage the other 9 clips.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the trim board upward.

    HINT:
    In order to prevent the door panel from being damaged, cover the areas indicated by arrow marks in the illustration with protective tape.



    B066961E01
  1. Disconnect the 2 cables from the inside handle, as shown in the illustration.

  1. Using a screwdriver, disengage the 10 hooks and remove the weatherstrip inner.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the 2 screws and inside handle.



5. REMOVE SEAT MEMORY SWITCH


    B131011E01
  1. Disengage the 4 claws and remove the seat memory switch.