Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    44-41    Wrong Disc

DTC    44-42    Disc cannot be Read

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
44-41
An unsuitable disc is inserted.
  1. DVD
  2. Television display assembly
44-42
The disc cannot be read.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc.



NG
CHANGE DISC
OK


2.DISC CLEANING


    I100151
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.


NEXT


3.CLEAR DTC
  1. Clear the DTC (Click here).


NEXT


4.RECHECK DTC
  1. Recheck DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



OK
END
NG


5.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with another and recheck.

    1. Replace the disc with another normal one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check if the same trouble occurs again.

      OK:
      Malfunction disappears.



NG
REPLACE TELEVISION DISPLAY ASSEMBLY
OK

END