ENGINE ASSEMBLY > INSPECTION |
| 1. INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY LH |
![]() |
Using a precision straightedge and feeler gauge, measure the warpage on the contact surface of the cylinder head.
| 2. INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY RH |
![]() |
Using a precision straightedge and feeler gauge, measure the warpage on the contact surface of the cylinder head.
| 3. INSPECT INTAKE AIR SURGE TANK ASSEMBLY |
![]() |
Using a precision straightedge and feeler gauge, measure the warpage on the contact surface of the intake manifold.
| 4. INSPECT INTAKE MANIFOLD |
![]() |
Cylinder head side:
Using a precision straightedge and feeler gauge, measure the surface contacting the cylinder head for warpage.
Surge tank side:
Using a precision straightedge and feeler gauge, measure the surface contacting the surge tank for warpage.