Home › ENGINE › 2GR-FE COOLING › RADIATOR

RADIATOR > INSPECTION

for Preparation Click here



1. INSPECT LOCK PLATE FOR DAMAGE


    A132665E01
  1. Inspect the lock plate for damage.

    HINT:
    1. Reassembly of a deformed tank will be impossible. Therefore, first correct the shape of the lock plate groove with pliers or a similar tool, if necessary.
    2. Water leakage will result if the bottom of the lock plate groove is damaged or dented. Repair or replace the locking plate if necessary.

    NOTICE:
    The radiator can only be crimped 3 times. After recrimping 2 times, the radiator core must be replaced.