Home › SECURITIES › ENGINE IMMOBILISER › TRANSPONDER KEY AMPLIFIER

TRANSPONDER KEY AMPLIFIER > REMOVAL

for Preparation Click here



1. REMOVE STEERING COLUMN COVER


    F044998
  1. Remove the 2 screws and steering column cover.



2. REMOVE TRANSPONDER KEY AMPLIFIER


    F045003
  1. Widen the claw hanging onto the upper bracket by approx. 1.0 mm (0.039 in.) using a screwdriver.

  1. Pull the transponder key amplifier toward the rear of the vehicle with the claw open.

    NOTICE:
    Take care not to use excessive force to prevent the case from being damaged.