With the body lower back panel assembly removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
Remove the welding points in areas (1).
Remove the welding points in areas (1).
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
Install, adjust and secure the rear floor panel rear.
| *1 | REAR FLOOR PANEL REAR |
Weld the rear floor panel rear in the areas (1).
Weld the rear floor panel rear in the areas (1).
Weld the weld bolts (1) on the new part.
Take the quantity and position from the component to be replaced.
Weld the weld bolts (1) on the new part.
Take the quantity and position from the component to be replaced.
After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.