REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
Remove the weld points in areas (1).
Remove the weld points in areas (1).
PREPARE NEW PART
Remove sealant in the marked areas cleaner R1.
| Cleaner R1 | 100ml, Bottle | 08833-WA050 |
Apply brushable seam seal in the windshield header panel sub-assy and roof panel reinforcement sub-assy rear.
| Brushable Seam Seal | 310ml | 08826-WA230 |
| *1 | WINDSHIELD HEADER PANEL SUB-ASSY | *2 | ROOF PANEL REINFORCEMENT SUB-ASSY REAR |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
Weld the roof panel in the areas (1).
Weld the roof panel in the areas (1).
After welding, apply body sealer to the corresponding parts. (See the painting/coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.