CONSTRUCTION
Solenoid valve-type injectors have been adopted. The injectors accept the fuel pressure of up to 350 bar from the fuel pump assembly, enabling fuel to be injected into the combustion chamber under higher pressure.
The discharge orifices of the fuel injector assembly have inward-facing tapers, which provides a high level of flexibility with regard to spray angle and shape while also enabling stable injection even when the effects of temperature and pressure inside the combustion chamber are large. This enables highly precise and homogenous injection into the cylinders.
| *a | Fuel Injector Assembly, Cross Section | *b | Nozzle |
| *c | Fuel Injector Assembly, Bottom View | - | - |