Home › Engine / Hybrid System › B48 (FUEL) › FUEL SYSTEM › 2019.03–2021.03
NM3650E _51 Engine / Hybrid System _080976 B48 FUEL _0392153 FUEL SYSTEM GE GENERAL F

B48 FUEL  FUEL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The engine uses a direct injection system which injects fuel directly into the cylinder for enhanced performance.


b.

A flow control valve is used to perform fuel pressure control for the high pressure fuel system.


c.

The fuel suction tube with pump and gauge assembly is controlled by the ECM via the Fuel Pump Control ECU (FPC).


d.

In the event of a collision [when a signal is received from the crash safety module (airbag ECU assembly)], the fuel suction tube with pump and gauge assembly is stopped by the fuel leak prevention system to help ensure safety.