CONSTRUCTION
The fuel pump assembly takes the fuel sent from the low pressure fuel system and uses the reciprocating motion of the pistons in the fuel chamber to compress the fuel to a maximum of 350 bar and then feeds it to the high pressure fuel system.
The ECM uses Pulse Width Modulation (PWM) control signals to operate the flow control valve, which performs flow rate and fuel pressure control of the supplied fuel.
| *1 | Fuel Pressure Sensor | *2 | Fuel Delivery Pipe |
| *3 | No. 2 Fuel Delivery Pipe | *4 | Fuel Pump Assembly |
| *5 | Fuel Injector Assembly | - | - |
| *a | Flow Control Valve | - | - |