Home › Engine / Hybrid System › B58 (LUBRICATION) › LUBRICATION SYSTEM
NM3650E _51 Engine / Hybrid System _080979 B58 LUBRICATION _0392156 LUBRICATION SYSTEM DE DETAILS F

B58 LUBRICATION  LUBRICATION SYSTEM  DETAILS  OIL PUMP  


CONSTRUCTION


a.

A variable discharge oil pump is used for engine lubrication. The variable discharge oil pump supplies the optimum amount of oil needed for lubrication of each part of the engine. The amount of oil required varies based on driving conditions as follows:

i.

High engine speed: Small amount of oil


ii.

High load: Large amount of oil



b.

The variable discharge oil pump is a vane pump which is driven by the crankshaft via a drive chain.


c.

The oil pump and vacuum pump are integrated as a tandem-type pump within a lightweight aluminum housing.


d.

The discharge volume of the variable discharge oil pump is adjusted using oscillation of the chamber housing.

W141668C01
5.708,2.167 5.958,2.583 5.958,2.583 6.125,2.583 true 1.167,0.781 1.333,0.781 1.333,0.781 1.833,1.615 true 0.969,0.698 1.281,0.854 0.313,0.156 10 false *1 6.198,2.5 6.51,2.656 0.313,0.156 10 false *2 3.917,0.75 4.229,0.906 0.313,0.156 10 false *a
*1 Oil Pump Assembly
·

Variable Discharge Oil Pump

·

Vacuum Pump


*2 Chamber Housing
*a Oil Pump Operating Mechanism - -