Home › Engine / Hybrid System › B58 (LUBRICATION) › LUBRICATION SYSTEM
NM3650E _51 Engine / Hybrid System _080979 B58 LUBRICATION _0392156 LUBRICATION SYSTEM DE DETAILS F

B58 LUBRICATION  LUBRICATION SYSTEM  DETAILS  OIL PRESSURE CONTROL VALVE  


CONSTRUCTION


a.

The oil pressure control valve assembly provides stepless control of the oil pressure inside the chamber housing.


b.

When the oil pressure inside the chamber housing is low, the oil discharge amount from the oil pump assembly is minimized. The pressure differential in the oil pathways becomes lower, reducing the energy for driving the oil pump assembly.


c.

The oil pressure control valve assembly is stopped and is closed during emergency operation. In this operation, the oil pressure inside the chamber housing is maintained at a consistently high level, and supply control of engine oil is not possible.