CONSTRUCTION
The turbocharger housing has been integrated with the cast exhaust manifold to save space.
The twin-scroll type* turbocharger sub-assembly has a compact design for reduced heat losses, realizing enhancements to both power performance and responsiveness.
*: Rather than a twin turbo system using 2 separate turbochargers, exhaust gas is used to drive a single turbine via 2 separate pathways.
The volume of exhaust gas flow to the turbine is controlled via the opening and closing of an electrically-operated wastegate valve.
| *1 | Exhaust Manifold
·
Turbocharger Sub-assembly |
*2 | Turbocharger Actuator and Link Assembly
·
Electrically-operated Wastegate Valve |
| *a | Thrust Rod | - | - |
|
Intake Air |
|
Exhaust Gas |