Home › Engine / Hybrid System › B58 (ENGINE MECHANICAL) › ENGINE UNIT
NM3650E _51 Engine / Hybrid System _081020 B58 ENGINE MECHANICAL _0392421 ENGINE UNIT DE DETAILS F

B58 ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD  


CONSTRUCTION


a.

A cracking manufacturing process has been adopted in which connecting rods are forged as a single piece, then fracture split and re-assembled after the crankshaft has been passed through.


b.

A tapered design is used for the small end of the connecting rod to reduce weight.


c.

A special coating is applied on the contact surface of the connecting rod and the connecting rod bearings, which reduces the contact surface wear and friction during engine start.

W141722C01
2.5,1.667 2.75,1.25 2.75,1.25 2.917,1.25 true 4.417,1.167 4.583,1.167 4.583,1.167 4.833,1.583 true 1.792,2.333 1.958,2.333 1.958,2.333 2.208,1.917 true 5.208,0.615 5.458,1.031 5.458,1.031 5.625,1.031 true 2.99,1.167 3.302,1.323 0.313,0.156 10 false *1 5.719,0.948 6.031,1.104 0.313,0.156 10 false *2 1.583,2.24 1.896,2.396 0.313,0.156 10 false *a 4.219,1.083 4.531,1.24 0.313,0.156 10 false *1
*1 Connecting Rod Sub-assembly *2 Piston with Pin Sub-assembly
*a Connecting Rod Bearing - -