SYSTEM CONTROL
The manual speed limiter limits the maximum driving speed to a limit that can be set by the driver at any time with the steering pad switch assembly in the range from 30 km/h (19 mph) to 250 km/h (155 mph). Although the manual speed limiter limits the engine torque, the function does not apply the brakes. Driving below this limit is possible as normal without any restrictions. In contrast to the familiar speed control functions such as cruise control, a brake intervention does not deactivate the manual speed limiter.
Override by the driver
Deeply depressing the accelerator pedal (99%) will allow the set speed to be exceeded during system operation. This lifts the limit and puts the system in temporary override mode. Driving above the limit is now possible in the normal way (continuing to deeply depress the accelerator pedal is not necessary).
As soon as the speed falls back below the set limit, the manual speed limiter is reactivated automatically. This can also be achieved by increasing the limit speed to a sufficient level.
Visual warning
If the current speed exceeds the limit speed by more than a minor tolerance, a warning is displayed to warn the driver accordingly. It does not matter whether the vehicle exceeds the limit speed by means of override, due to downhill driving or by reducing the set limit speed. The visual warning takes the form of the green LIMIT indicator flashing continuously.
Acoustic warning
If the current speed exceeds the limit speed by more than a minor tolerance and the system is not in driver override, an acoustic warning will sound in addition to the visual warning for a maximum duration of 10 seconds. The acoustic warning is not issued until the speed limit is exceeded by 3 km/h (2 mph), so that the warning does not bother the driver when the speed limit is only exceeded briefly. After the limit speed has been adjusted, the acoustic warning is time delayed.
Interaction with other systems
The manual speed limiter cannot be operated simultaneously with systems such as cruise control. It also will not operate with the winter tire speed warning. Furthermore, regarding recognition of speed limit signs, please refer to the speed limit info.
FUNCTION
As with conventional cruise control, the manual speed limiter function intervenes in engine and transmission control in order to reduce the engine torque requested by the driver before the selected limit speed is exceeded. The manual speed limiter is controlled by the skid control ECU, and communicates with other ECUs via the FlexRay bus.
Active manual speed limiter operation is indicated by a green LIMIT indicator in the combination meter assembly. In addition, after the system has been activated or the limit speed has been adjusted, the updated digital value is also shown briefly to serve as operation feedback. When the system is passive, the indicator is shown in grey.
The manual speed limiter is operated via the steering pad switch assembly. The system is activated and deactivated with the LIM switch. When it is activated, the current vehicle speed (minimum 30 km/h (19 mph)) is set as the limit speed. When the system is active, the limit speed can be adjusted in increments of +/- 1 km/h (0.6 mph) or +/- 10 km/h (6 mph).
| *a | System Active | *b | Standby |
| *c | Warning Display (Flashing) | *d | The illustrations shown are examples only. |
| *a | System Active | *b | Standby |
| *c | Warning Display (Flashing) | *d | The illustrations shown are examples only. |