Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › 2019.03–2020.03
NM3650E _51 Engine / Hybrid System _081002 CRUISE CONTROL _0392866 LANE DEPARTURE ALERT SYSTEM CO CONTROL F

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  CONTROL  LANE DEPARTURE ALERT CONTROL  


SYSTEM CONTROL


a.

The lane departure warning with active steering intervention consists of the skid control ECU, forward recognition camera, etc.


b.

The forward recognition camera looks forward and recognizes lane markings and lateral clearance. In addition, the function utilizes signals from the skid control ECU and other ECUs and sensors, such as general vehicle parameters, speed, steering angle and driving dynamics or odometer data.


c.

When steering force is applied, a vehicle steering direction signal is sent to the skid control ECU. This signal is converted to a steering torque signal and sent to the power steering ECU. The corrective steering interventions from the system can always be overridden by the driver without a great deal of effort.


d.

Depending on the steering system variant, the haptic warning is implemented either via a vibration actuator in the steering wheel or via an active vibration activation of the steering wheel via the power steering ECU.



FUNCTION


a.

The lane departure warning function provides feedback to the driver as follows:

i.

Lane departure warning indicator in the combination meter assembly.


ii.

Warning buzzer to prevent misuse of the system.


iii.

Messages displayed in the combination meter assembly along with the sounding of the buzzer.


iv.

Steering wheel vibration.


v.

Active steering intervention toward the opposite direction from departure (can be felt by the driver).



b.

The lane departure warning with active steering intervention can be configured using the Toyota Supra Safety button.


c.

The sensitivity of the lane departure warning alert has 4 levels.

i.

Early: The system warning is activated early every time a potentially dangerous situation is detected.


ii.

Medium: The system fulfills the standardized safety requirements.


iii.

Reduced: Certain situation-specific interventions are suppressed. For example, overtaking without using turn signal, or crossing the line on a curve, etc.


iv.

Off: Alert is deactivated.



d.

Steering intervention can be turned on or off. When turned off, the lane departure warning simply issues a warning and active steering intervention does not take place.


e.

The strength of the steering wheel vibration can be set to the levels "weak", "medium" and "strong".

Y237973C01
1.521,2.49 1.688,2.49 1.688,2.49 2.188,3.323 true 4.781,4.74 5.531,5.99 5.531,5.99 5.698,5.99 true 1.333,2.385 1.646,2.542 0.313,0.156 10 false *1 5.771,5.885 6.083,6.042 0.313,0.156 10 false *2 1.583,5.719 1.896,5.875 0.313,0.156 10 false *b 0.229,7.531 0.542,7.688 0.313,0.156 10 false *c 1.594,0.281 1.906,0.438 0.313,0.156 10 false *a
*1 Combination Meter Assembly *2 Pattern Select Switch Assembly
*a Lane Departure Warning Indicator *b Toyota Supra Safety Button
*c The illustrations shown are examples only. - -