Home › Engine / Hybrid System › CRUISE CONTROL › SPEED LIMIT ASSIST
NM3650E _51 Engine / Hybrid System _081002 CRUISE CONTROL _0392867 SPEED LIMIT ASSIST CO CONTROL F

CRUISE CONTROL  SPEED LIMIT ASSIST  CONTROL  SPEED LIMIT ASSIST CONTROL  


FUNCTION


a.

The speed limit assist enables the driver in the event of a change of the speed limit to adopt it easily as the intended speed for the manual speed limiter, cruise control or adaptive cruise control with stop&go function.


b.

If a speed limit changes, speed limit assist will offer the adoption of the value to the driver and displays the information in the combination meter assembly and headup display (meter mirror sub-assembly).*

*: Models with headup display



c.

Data from the speed limit info will be used and assessed for this purpose.


d.

The new speed is adjusted to the new requested speed with a shift program that is optimized for comfort and consumption, overrun and braking.


e.

The function can be activated via the multi-display assembly, set up for manual adoption and a positive or negative offset can be specified for the identified speed limit.



SYSTEM CONTROL


a.

Speed limit assist reads the speed limits from the speed limit info and the navigation system. For this purpose, the data that is displayed for the speed limit info in the combination meter assembly will be imported and offered to the driver for adoption in the event of changes.


b.

When speed limits of sufficient quality are available in the navigation system, speed limits are also identified from there, even before the vehicle passes the sign. The navigation system is used for this purpose.


c.

If the limit changes to a limit that is lower than the currently driven speed on this path, a location will be calculated at which a comfortable shift program is possible to reach the speed at the location of the new speed limit.


d.

When the vehicle passes this location, the new limit will be offered to the driver. When the driver confirms the adoption, the vehicle will switch to this driving program and regulates the speed for the new limit.


e.

In the case of a limit that is higher than the current limit, the vehicle will be comfortably accelerated to the new speed.


f.

The positive or negative speed offset, which can be set up via the multi-display assembly, is taken into account for the new desired speed.



OPERATION


a.

Speed limit assist is displayed in the combination meter assembly and the headup display (meter mirror sub-assembly)*. When the speed limit assist function is active, the indicators will be displayed in the combination meter assembly. When a new speed limit is pending, this is shown on the display.

*: Models with headup display



b.

A progress indicator is shown on the speedometer from the old requested speed to the offered speed.


c.

Speed limit assist can be configured using the multi-display assembly.


d.

The speed limit information offered by the speed limit assist can be adopted by pressing the SET switch on the steering pad switch assembly.


e.

There is no effect on the manual speed limiter, cruise control or adaptive cruise control with stop&go function control itself.

Y237967C01
0.115,0.75 0.427,0.906 0.313,0.156 10 false *a 0.115,2.063 0.427,2.219 0.313,0.156 10 false *b 0.927,0.125 1.24,0.281 0.313,0.156 10 false *c 2.177,0.135 2.49,0.292 0.313,0.156 10 false *d 3.521,0.115 3.833,0.271 0.313,0.156 10 false *e 5.667,0.135 5.979,0.292 0.313,0.156 10 false *f 5.667,1.885 5.979,2.042 0.313,0.156 10 false *g 0.125,3.552 0.438,3.708 0.313,0.156 10 false *h 5.667,0.552 5.979,0.708 0.313,0.156 10 false *g
*a Headup Display (Meter Mirror Sub-assembly)(Models with Headup Display) *b Combination Meter Assembly
*c Manual Speed Limiter and Speed Limit Assist Operating *d New speed limit detected and prompted to accelerate.
*e Speed setting confirmation by pressing the SET switch. *f New speed limit set, including offset (within +/- 15 km/h (9 mph))
*g 3 seconds later *h The illustrations shown are examples only.