Home › Engine / Hybrid System › B48 (EMISSION CONTROL) › EMISSION CONTROL SYSTEM
NM3650E _51 Engine / Hybrid System _081099 B48 EMISSION CONTROL _0392890 EMISSION CONTROL SYSTEM CO CONTROL F

B48 EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EVAPORATIVE EMISSION CONTROL  


FUNCTION


a.

Canister purge control suppresses the release of fuel vapor from the fuel tank.


b.

The fuel tank breather valve is a solenoid valve that is controlled via a Pulse Width Modulation (PWM) signal from the ECM, which controls the purge quantity sent to the engine.


c.

When the engine is stopped, the fuel tank breather valve closes to block off the purge line that leads from the No. 1 charcoal canister filter to the intake manifold side, thus preventing the flow of fuel vapor into the engine.


d.

Air ventilation proceeds from the fuel tank to the outside air via the No. 1 charcoal canister filter to which the fuel vapor adsorbs.

W139974C01
5.188,3.021 5.438,3.438 5.438,3.438 5.604,3.438 true 0.802,0.635 1.417,0.833 0.615,0.198 10 false *a 5.125,2.531 5.615,2.74 0.49,0.208 10 false *c 5.948,0.906 7.042,1.208 1.094,0.302 10 false *b 0.813,2.104 1.427,2.302 0.615,0.198 10 false *1 1.698,1.396 2.313,1.594 0.615,0.198 10 false *2 3.094,1.771 3.708,1.969 0.615,0.198 10 false *3 3.094,2.771 3.708,2.969 0.615,0.198 10 false *4 5.115,1.563 5.729,1.76 0.615,0.198 10 false *5 5.677,3.354 6.292,3.552 0.615,0.198 10 false *6
*1 Intake Manifold *2 Purge Line
*3 Fuel Tank Breather Valve *4 ECM
*5 No. 1 Charcoal Canister Filter *6 Fuel Tank
*a Intake Air *b Atmosphere
*c Fuel Vapor - -