Home › Engine / Hybrid System › B48 (EMISSION CONTROL) › EMISSION CONTROL SYSTEM
NM3650E _51 Engine / Hybrid System _081099 B48 EMISSION CONTROL _0392890 EMISSION CONTROL SYSTEM CO CONTROL F

B48 EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EGR CONTROL  


SYSTEM CONTROL


a.

A system using the variable camshaft timing control of the intake and exhaust valves to provide internal engine Exhaust Gas Recirculation (EGR) has been adopted.


b.

The amount of exhaust gas recirculated is determined by the magnitude of valve overlap and the pressure differential between the exhaust manifold and the intake duct. The variable camshaft timing control provides variable valve overlap.


c.

The internal Exhaust Gas Recirculation (EGR) system has the following characteristics:

i.

Gas does not remain in the intake manifold, giving quicker reaction time when compared to an external Exhaust Gas Recirculation (EGR) system.


ii.

Due to recirculation of exhaust heat from the exhaust gas back into the cylinder, air mixing when engine is cold is improved, reducing the amount of hydrocarbon in the exhaust.


iii.

Combustion temperatures are lowered, reducing the amount of nitrogen oxide exhaust products formed.