OUTLINE
By locating a wide range air fuel ratio sensor upstream of the 2 serially arranged Three-Way Catalytic (TWC) monoliths and an oxygen sensor between them, precise air-fuel ratio control and self-diagnosis of catalyst performance were made possible.
By adopting the variable camshaft timing control of the intake and exhaust side camshafts, an internal Exhaust Gas Recirculation (EGR) system that proactively recirculates exhaust gases was realized.
Canister purge control was implemented to prevent leakage of hydrocarbons from the fuel tank. This suppresses the release of fuel vapor.
A mechanism for recirculation of blowby gas has been provided. While re-combusting the blowby gas that occurs during combustion, this produces a vacuum inside the crankcase. At this time, the oil contained within the blowby gas is separated using the oil trap.
The TWC converter uses 2 monoliths mounted in series, contributing to reduced emissions.
A Gasoline Particulate Filter (GPF) system is used for the models compliant with EURO 6d emission regulations to purify Particulate Matter (PM) contained in exhaust gas.
When it is determined that vehicle maintenance is necessary, the indicator light for emissions inspection illuminates accordingly. (The maintenance pitch varies according to driving conditions.)