Home › Engine / Hybrid System › B58 (EMISSION CONTROL) › EMISSION CONTROL SYSTEM
NM3650E _51 Engine / Hybrid System _081436 B58 EMISSION CONTROL _0394314 EMISSION CONTROL SYSTEM CO CONTROL F

B58 EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EXHAUST EMISSION CONTROL  


FUNCTION


a.

A wide range air fuel ratio sensor has been provided upstream of the 2 catalytic monoliths. The wide range air fuel ratio sensor detects the oxygen concentration in the pre-conversion exhaust gas and sends that information to the ECM, and based on that signal the ECM controls the fuel injection volume.


b.

The oxygen sensor has been provided between the 2 catalytic monoliths. The oxygen sensor monitors the oxygen concentration in the exhaust gas processed by the three-way catalytic converter. This allows degradation of catalyst performance to be detected.


c.

The differential pressure sensor is used to measure the pressure differential between atmosphere and upstream of the GPF catalyst. (Models with GPF)


d.

The exhaust manifold converter sub-assembly and the differential pressure sensor are connected with pipes and hoses. (Models with GPF)

W142986C01
3.385,2.219 3.552,2.219 3.552,2.219 3.708,1.969 true 3.385,2.615 3.552,2.615 3.552,2.615 3.708,2.365 true 2.635,1.229 2.854,1.406 0.219,0.177 10 false *1 3.99,1.219 4.198,1.406 0.208,0.188 10 false *2 3.188,2.115 3.396,2.292 0.208,0.177 10 false *3 3.99,2.073 4.198,2.24 0.208,0.167 10 false *4 3.188,2.51 3.396,2.719 0.208,0.208 10 false *5 1.49,1.208 1.823,1.458 0.333,0.25 10 false *a 3.99,2.479 4.198,2.646 0.208,0.167 10 false *4 2,2.698 2.677,2.948 0.677,0.25 10 false *6 (*A)
*A Models with GPF - -
*1 ECM *2 Engine
*3 Wide Range Air Fuel Ratio Sensor *4 TWC Monolith
*5 Oxygen Sensor *6 Differential Pressure Sensor
*a Various Sensors - -
V100135

Intake Air
V100136

Exhaust Gas (to GPF)