FUNCTION
By operating an electrical switch, the seat adjustments can be performed in the horizontal and vertical directions.
The seat position adjustment drive units have been provided in the driver seat and passenger seat to perform seat adjustments in the horizontal and vertical directions.
By operating an electrical switch, the seat height adjustment can be performed.
The seat height adjustment drive units have been provided in the driver seat and passenger seat to adjust the heights of the seats.
By operating an electrical switch, the seat cushion tilt adjustment can be performed.
The seat cushion tilt drive units have been provided in the driver seat and passenger seat to perform seat cushion tilt adjustments.
By operating an electrical switch, the seat backrest angle adjustments can be performed.
The seat backrest angle adjustment drive units have been provided in the driver seat and passenger seat to perform seat backrest angle adjustments.
By operating an electrical switch, the seat backrest width adjustment can be performed.
Compressed air is fed to the driver seat and passenger seat backrests to perform seat backrest width adjustments.
Optional lumbar support adjustment has been made available for the driver and passenger seat, depending on the specifications.
Compressed air is fed to the driver seat and passenger seat llumbar support cushions from the lumbar support valve blocks to perform lumbar support adjustments.
| *A | Models with Position Control ECU Assembly | - | - |
| *1 | Front Vertical Motor | *2 | Back Side Support Block |
| *3 | Lumbar Support Block | *4 | Lumbar Support Pump |
| *5 | Seatback Side Support Adjuster Assembly | *6 | Lumbar Support Adjuster Assembly |
| *7 | No. 1 Power Seat Switch Assembly | *8 | Slide Motor |
| *9 | Lifter Motor | *10 | Position Control ECU Assembly |
| *11 | Reclining Motor | - | - |
| *A | Models with Lumbar Support | - | - |
| *1 | Seat Memory Switch | *2 | Back Side Support Switch |
| *3 | Lumbar Support Switch | *4 | Front Vertical Switch |
| *5 | Seat Slide Switch | *6 | Seat Lifter Switch |
| *7 | Seat Reclining Switch | - | - |
| *a | The illustration shown is an example only. | - | - |
The seat memory function has been provided on the driver's seat.
The seat memory contains only the following adjustment options: forward and rearward seat adjustment, seat height adjustment, seat angle adjustment, backrest angle adjustment.
The lumbar support and the backrest width adjustment cannot be stored in the seat memory function.
When seat positions have been stored, the seats can be adjusted to the registered positions at any time.
Up to two seat positions can be stored.
The seat positions can be stored by pressing button 1 or 2 for seat memory and then pressing the SET button.
| *1 | 2 Switch | *2 | 1 Switch |
| *3 | SET Switch | - | - |
By operating the front/back seat adjustment button, the driver or passenger seat positions can be moved by up to 220 mm (8.66 in.).
By operating the seat height adjustment, the driver and the passenger seat positions can be moved by up to 56 mm (2.21 in.).
By operating the seat angle adjustment, the angles of the driver seat and passenger seat can be moved to the desired angle.
By operating the backrest angle adjustment, the angles of the driver seat and passenger seat seatbacks can be moved to the desired angle.
By operating the backrest width adjustment, the driver or passenger seat backrest width can be set individually.
By operating the lumbar support, the driver or passenger seat lumbar support positions can be moved horizontally and vertically.
| *a | Seat Reclining | *b | Back Side Support |
| *c | Lumbar Support | *d | Seat Lifter |
| *e | Front Vertical | *f | Seat Slide |