Home › Engine / Hybrid System › B58 (ENGINE CONTROL) › SFI SYSTEM
NM3650E _51 Engine / Hybrid System _081917 B58 ENGINE CONTROL _0395712 SFI SYSTEM CO CONTROL F

B58 ENGINE CONTROL  SFI SYSTEM  CONTROL  FUEL PUMP CONTROL (FOR HIGH-PRESSURE PUMP)  


FUNCTION


a.

The ECM performs variable high pressure fuel pressure control according to the driving conditions.


b.

A flow quantity control valve regulated by the ECM has been adopted to ensure that the system only injects the quantity of fuel required under the instantaneous conditions into the combustion chamber.


c.

The ECM detects fuel pressure using the fuel pressure sensor on the fuel delivery pipe and performs feedback control to achieve the desired pressure.

Control Pressure for Each Driving Condition
Condition Control Pressure
Idling 50 bar
Full load 200 bar