Home › Engine / Hybrid System › B58 (ENGINE CONTROL) › SFI SYSTEM
NM3650E _51 Engine / Hybrid System _081917 B58 ENGINE CONTROL _0395712 SFI SYSTEM DE DETAILS F

B58 ENGINE CONTROL  SFI SYSTEM  DETAILS  ACCELERATOR PEDAL SENSOR  


CONSTRUCTION


a.

Accelerator pedal position is monitored separately by 2 individual sensors. Two angle sensors using the Hall effect* are employed to provide redundancy, implement the monitoring function and facilitate recognition of malfunctions.

HINT:

*: Phenomenon in which a potential difference is generated perpendicular to the flow of current through a conductor or semiconductor within a magnetic field not parallel to the flow of current.



b.

The accelerator pedal value is detected by the sensors as an angle and output directly to the ECM as an analogue, linear signal.


c.

Each change in accelerator pedal position is transmitted to the ECM with a maximum lag of 50 milliseconds. The ECM monitors the 2 input signals of the sensors and compares them for plausibility (factors such as mutual synchronicity, linearity, etc.).

W141688C01
2.865,1.5 3.031,1.5 3.031,1.5 3.281,1.917 true 2.667,1.417 2.979,1.573 0.313,0.156 10 false *1
*1 Accelerator Pedal Sensor Assembly - -