Home › Engine / Hybrid System › B58 (COOLING) › COOLING SYSTEM
NM3650E _51 Engine / Hybrid System _082606 B58 COOLING _0398577 COOLING SYSTEM DE DETAILS F

B58 COOLING  COOLING SYSTEM  DETAILS  WATER TEMPERATURE SENSOR  


CONSTRUCTION


a.

The engine coolant temperature sensor (for engine) is installed to the cylinder head sub-assembly. The engine coolant temperature sensor (for engine) converts the temperature of the coolant into an electrical value (resistance).


b.

The engine coolant temperature sensor (for radiator) is installed at the outlet of the radiator coolant. The engine coolant temperature sensor (for radiator) detects the temperature of the coolant coming out of the radiator assembly as electrical value (resistance).


c.

The engine coolant temperature sensor (for engine) and the engine coolant temperature sensor (for radiator) send the coolant temperature signals from each position. The coolant temperature is a measured value for the following calculations, fuel injection rate and the target engine speed.