Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › SFI SYSTEM
NM3650E _51 Engine / Hybrid System _081734 B48 ENGINE CONTROL _0395336 SFI SYSTEM DE DETAILS F

B48 ENGINE CONTROL  SFI SYSTEM  DETAILS  CAMSHAFT POSITION SENSOR  


CONSTRUCTION


a.

The camshaft position sensor (for intake camshaft) detects the position of the intake camshaft sub-assembly using an increment wheel (camshaft sensor wheel) attached to the intake camshaft sub-assembly. The crank position sensor and camshaft position sensor (for intake camshaft) are necessary for the fully sequential fuel injection (fuel injection takes place individually for each cylinder at the specific ignition point).


b.

The camshaft position sensor (for exhaust camshaft) detects the position of the exhaust camshaft sub-assembly with the help of a pulse wheel (camshaft sensor wheel) attached to the exhaust camshaft sub-assembly. The camshaft position sensor (for exhaust camshaft) is required for the feedback signal to adjust the exhaust camshaft.


c.

Should the crank position sensor fail the engine management system will use the camshaft position sensors to calculate engine speed. However, the resolution of the camshaft position sensor signals is too imprecise to replace the crank position sensor during normal operation.

W141686C01
3.865,3.021 4.365,3.854 4.365,3.854 4.531,3.854 true 3.167,2.375 3.917,1.125 3.917,1.125 4.083,1.125 true 4.167,1.042 4.479,1.198 0.313,0.156 10 false *1 4.604,3.771 4.917,3.927 0.313,0.156 10 false *2 0.365,1.25 0.677,1.406 0.313,0.156 10 false *a
*1 Camshaft Position Sensor (for Exhaust Camshaft) *2 Camshaft Position Sensor (for Intake Camshaft)
*a Camshaft Position Sensor Image - -