Home › Engine / Hybrid System › B48 (COOLING) › COOLING SYSTEM
NM3650E _51 Engine / Hybrid System _081996 B48 COOLING _0395825 COOLING SYSTEM CO CONTROL F

B48 COOLING  COOLING SYSTEM  CONTROL  COOLING FAN CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
ECM Controls the fan with motor assembly based on signals from the engine and vehicle sensors.
Fan with Motor Assembly Rotates according to the signal from the ECM.
Engine Coolant Temperature Sensor (for Engine) Detects coolant temperature and sends it to the ECM.
Engine Coolant Temperature Sensor (for Radiator) Detects coolant temperature at radiator outlet and sends it to the ECM.
Oil Temperature Sensor Detects the temperature between the 2 cylinders and sends it to the ECM.


FUNCTION


a.

The ECM sends a control signal to the fan with motor assembly according to the driving conditions to optimally control the fan rotation speed.


b.

The fan speed varies depending on the coolant temperature and the refrigerant pressure of the air conditioner. As the running speed increases, the fan speed decreases.