CONSTRUCTION
The mechanical coolant pump installed in water inlet housing with water pump sub-assembly is driven together with the air conditioner compressor by the belt on the front end of the engine.
The maximum injection pressure of the mechanical water pump is limited to 2.1 bar (relative pressure).
| *1 | Water Inlet Housing with Water Pump Sub-assembly | - | - |
| *a | Radiator Assembly Connection | *b | Cylinder Head Pathways Connection |
| *c | Heat Management Module (Water Valve) Connection | *d | Water Inlet Housing with Water Pump Sub-assembly, Contrary Side |
| *e | Oil Module Connection | - | - |