Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM
NM3650E _57 Power Source / Network _082879 NETWORKING _0399817 LIN COMMUNICATION SYSTEM GE GENERAL F

NETWORKING  LIN COMMUNICATION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The local interconnect network bus (LIN bus) is a serial, single-wire bus, standardized for the automotive industry. The local interconnect network bus (LIN bus) is mainly used in a configuration combining master and slave control units. The local interconnect network bus provides quick and reliable communication between master control units and slave units.


b.

Main buses are responsible for the inter-system data exchange between the control units.


c.

Sub-buses are used to exchange data within a functional group.


d.

In a LIN bus system, there can only be a single master control unit connected at any time. A maximum of 16 units (called slave devices) can be connected to the bus. LIN data transfer speeds are from 2.4 to 19.2 kBit/s.


e.

The components on the local interconnect network bus support the LIN V2.0 and later protocols.