Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM
NM3650E _58 Vehicle Interior _082880 HEATING / AIR CONDITIONING _0399821 AIR CONDITIONING SYSTEM DE DETAILS F

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  DETAILS  ROOM TEMPERATURE SENSOR (COOLER THERMISTOR)  


CONSTRUCTION


a.

On air conditioning systems with only one ventilation temperature sensor (No. 3 cooler thermistor), the delivery temperature is measured directly at the center ventilation flap on the driver's side.


b.

The footwell temperature sensor (No. 1 cooler thermistor) measures the delivery temperature at the footwell flap of the footwell ventilation duct.


c.

Based on these signals, the air conditioning amplifier assembly controls the corresponding flap motors (No. 1 air conditioning radiator damper servo sub-assembly).


d.

The ventilation temperature sensor (No. 3 cooler thermistor) and footwell temperature sensor (No. 1 cooler thermistor) are precision thermistors or NTC (Negative Temperature Coefficient) resistors.


e.

NTC resistors convert temperature values into resistance values, which can then be evaluated electronically. The conductive materials in the NTC resistor conduct current better at high temperatures than at low temperatures. In other words, the hotter the NTC resistor gets, the lower its resistance becomes.

Ventilation Temperature Sensor (No. 3 Cooler Thermistor)
Y240094C01
3.5,1 3.813,1.156 0.313,0.156 10 false *1 3.938,3.271 4.25,3.427 0.313,0.156 10 false *2 0.167,3.51 0.479,3.667 0.313,0.156 10 false *a
*1 Ventilation Temperature Sensor (No. 3 Cooler Thermistor) *2 2-pin Plug Connection
*a Illustration shows a representative example. - -


Footwell Temperature Sensor (No. 1 Cooler Thermistor)
Y240095C01
1.885,1.396 2.198,1.552 0.313,0.156 10 false *1 5.5,2.479 5.813,2.635 0.313,0.156 10 false *2 0.188,3.531 0.5,3.688 0.313,0.156 10 false *a
*1 Footwell Temperature Sensor (No. 1 Cooler Thermistor) *2 2-pin Plug Connection
*a Illustration shows a representative example. - -