CONSTRUCTION
The blower motor with fan sub-assembly creates the necessary air mass flow in the air conditioning system. The blower motor with fan sub-assembly consists of the blower motor with output stage, the fan wheel and the housing.
At the output stage, the air conditioning amplifier assembly specifies the target voltage for the blower motor. The target voltage is output by the air conditioning amplifier assembly as a signal on the LIN bus. Control of the blower motor via the blower output stage is performed based on this control signal.
| *1 | Blower Motor with Fan Sub-assembly | *2 | 4-pin Plug Connection |
| *a | Illustration shows a representative example. | - | - |