SYSTEM CONTROL
While the electrical key transmitter sub-assembly is detected, depressing and holding the brake pedal down while then pressing the engine switch will start the engine.
The main body ECU (multiplex network body ECU) performs the starting operation. The main body ECU (multiplex network body ECU) only starts the engine once all starting conditions have been met. If a precondition is no longer met during the starting operation, the starting operation is aborted.
When the engine is started, the brake pedal must be depressed at the same time. The starter assembly is only activated until the engine is running. If the engine fails to start, the starting operation is terminated after a defined period of time. On the first attempt to start the engine, the starter operation is terminated after approximately 16 seconds. This time is reduced progressively with each subsequent attempt to start the engine. For example, on the 5th unsuccessful attempt to start the engine, starter operation is terminated after just approximately 3 seconds.