Home › Engine / Hybrid System › B48 (STARTING) › STARTING SYSTEM
NM3650E _51 Engine / Hybrid System _082903 B48 STARTING _0399994 STARTING SYSTEM GE GENERAL F

B48 STARTING  STARTING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A more powerful starter assembly has been adopted for the auto start/stop function. Due to the operation of the auto start/stop function, the durability of the starter assembly must be increased to handle the higher load, so the starter assembly is configured for approximately 8 times the number of starting operations as compared to that of a vehicle without an auto start/stop function.


b.

For the auto start/stop function, the starter assembly offers the capability for carrying out a reflex start. With the auto start/stop function, it can happen that both the stop and start processes occur simultaneously, which is referred to as a "reflex start". Basically, this is a case in which the driver wants to continue driving at exactly the point in time that the engine is stopped.


c.

Starting and stopping the engine is push-button controlled, and includes cranking hold functionality for more convenient starting operation.