Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT SYSTEM
NM3650E _52 Drivetrain _082917 DRIVE SHAFT / PROPELLER SHAFT _0400081 PROPELLER SHAFT SYSTEM GE GENERAL F

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The propeller with center bearing shaft assembly has been adopted in various lengths optimized for each engine/transmission combination.


b.

The propeller with center bearing shaft assembly is connected to the input from the transmission via a flexible disc coupling secured with bolts.


c.

In the center of the shaft, a universal joint with a sliding mechanism has been adopted.


d.

On the output side to the rear differential, the shaft is connected via a flexible disc coupling using an inserted ball joint.

X143583