Home › Suspension › SUSPENSION CONTROL › ADAPTIVE VARIABLE SUSPENSION SYSTEM
NM3650E _53 Suspension _082918 SUSPENSION CONTROL _0400083 ADAPTIVE VARIABLE SUSPENSION SYSTEM CO CONTROL F

SUSPENSION CONTROL  ADAPTIVE VARIABLE SUSPENSION SYSTEM  CONTROL  ADAPTIVE VARIABLE SUSPENSION CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Absorber Control ECU Sends control signals to the absorber control actuator based on the data detected by the various vehicle body sensors.
Airbag ECU Assembly Detects the vehicle body movement (yawing, pitching, and rolling).
Acceleration Sensor Assembly Detects the movement of the vehicle wheels.
Shock Absorber Assembly Absorber Control Actuator Installed to each shock absorber assembly, and controls the damping force of the shock absorber assembly based on control signals from the absorber control ECU.
Pattern Select Switch Assembly Sport Mode Button Changes the driving mode.


SYSTEM CONTROL


a.

Adaptive Variable Suspension (AVS) uses the sensors located on each part of the vehicle to detect the following items:

i.

Vertical motion of the vehicle body and wheels


ii.

Front/back and left/right acceleration


iii.

Vehicle speed


iv.

Steering angle



b.

Based on the data detected from the various sensors, the absorber control ECU continually controls the absorber control actuator within the shock absorber assembly of each wheel in order to always keep the damping forces optimized for the road surface and driving conditions.