Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM
NM3650E _53 Suspension _082919 FRONT SUSPENSION _0400084 FRONT SUSPENSION SYSTEM DE DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  DETAILS  SUSPENSION SUPPORT AND COIL SPRING  


CONSTRUCTION


a.

The spring strut support bearing on the front suspension is precisely positioned in order to eliminate all body shell tolerances related to camber.


b.

An input force separating design has been adopted in which the forces from the coil spring and auxiliary coil spring are induced into the body directly through the support bearing flange. For this reason the rubber mount only has to transmit the damping force and can thus be dimensioned for the best possible acoustics and damping function regardless of load and pre-load.


c.

The newly introduced flange concept is a new geometrical design for the support bearing and aluminum shock absorber which leads to a reduction in bending load to the shock absorber. As a result, the wall thicknesses of the shock absorber have been reduced, and cost as well as weight reductions have been realized.


d.

The front suspension has been provided with safety spring plates that enable limited mobility to be retained in the event of a spring failure.


e.

The coil springs have been optimized in terms of tension and weight. To achieve a constant ride height, the coil springs are adapted to the weight of the vehicle including the engine and other equipment.

Conceptual Diagram of Front Absorber Support
X143574C01
3.281,1.635 3.594,1.833 0.313,0.198 10 false *e 4.031,1.49 4.344,1.688 0.313,0.198 10 false *f 2.531,1.469 2.844,1.667 0.313,0.198 10 false *d 3.542,2.438 3.854,2.635 0.313,0.198 10 false *g 3.542,0.417 3.854,0.615 0.313,0.198 10 false *b 3.552,0.094 3.865,0.292 0.313,0.198 10 false *a 3.531,0.74 3.844,0.938 0.313,0.198 10 false *c
*a Body *b Support Bearing Flange
*c Elastomer *d Coil Spring
*e Shock Absorber *f Auxiliary Coil Spring
*g Wheel - -