OUTLINE
A MacPherson strut type independent suspension is used, achieving both driving performance and comfort.
Unsprung mass has been greatly reduced through the use of aluminum swivel bearings and aluminum suspension links.
Excellent transition steering response has been achieved due to the very high rigidity of the connected links of the aluminum front axle carrier.
The very high rigidity of the front axle carrier has enabled further improvements of the transition steering response and engine acoustics.
MAIN FEATURES
The MacPherson strut type independent suspension allows the vehicle kinematics to be optimized with regard to driving dynamics, directional stability and steering feel.
The design of the suspension considers sports car typical wheel dimensions and directs maximum focus on transition steering response, cross-force potential and agility. Furthermore, the component rigidities in the complete assembly achieve extremely precise wheel control and the necessary stability.
The hydraulically muted tension strut mount eliminates unpleasant vibrations and oscillations.
The suspension has been designed using a material combination of steel and aluminum to disperse the stresses to which the strut is exposed.