CONSTRUCTION
The coil springs have been optimized in terms of tension and weight. To achieve a constant ride height, the coil springs are adapted to the weight of the vehicle including the engine and other equipment.
The rear suspension has been provided with safety spring plates that enable limited mobility to be retained in the event of a spring failure.
The shock absorber design adopts a twin-sleeve gas-filled shock absorber (with hollow piston rod) plus a PTFE-coated piston with virtually linear shock absorber characteristic curves.
| *A | Models with Adaptive Variable Suspension (AVS) | - | - |
| *a | Rubber Mount | *b | Outer Tube (Outer Shell) |
| *c | Hollow Piston Rod (Absorber Rod) | *d | Inner Tube (Intermediate Pipe) |
| *e | Absorber Control Actuator | *f | Piston valve is not shown. and illustration shows the rear suspension shock absorber assembly as a representative example. |