OUTLINE
The rear suspension delivers precise wheel control for outstanding driving dynamics in terms of agile, sports car-like behavior during power on and power off, directional stability, self-steering response, stability when changing lanes, response when changing between cornering and straight-ahead driving, and more.
Excellent comfort and driving dynamics are achieved through vibration-absorbing dual flexible mounting of the rear differential as well as the large supporting base and high structural rigidity of the rear axle support.
Driving dynamics are optimized by compliant deflection of the suspension.
Unsprung mass has been greatly reduced through the use of steel link technology and aluminum suspension supports.
MAIN FEATURES
The multi-link rear suspension is basically derived from a double-wishbone suspension with a track rod located behind it, whose top and bottom 3-axle links have each been substituted by 2 single links. The benefit here is that the effective virtual kinematic points can be freely defined, irrespective of the installation space conditions.
In combination with the precisely adapted ball joints and rubber mounts, this results in elastic-kinematics that implement the accurate wheel control required to achieve the desired driving dynamics over a wide spring travel range. Due to small, effective lever arms, these elastic-kinematics also offer optimum immunity to disruptions on the roadway.
Not only the incredibly rigid links, but also the rigid rear axle support and the connection to the body via compression struts ensure maximum precision where wheel control is concerned, which is in turn a prerequisite for agile overall vehicle performance.