Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
NM3650E _55 Steering _082921 POWER ASSIST SYSTEMS _0400086 POWER STEERING SYSTEM DE DETAILS F

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  DETAILS  STEERING GEAR  


CONSTRUCTION


a.

By integrating the servomotor with rotor position sensor and the power steering ECU, the steering gear size has been reduced.


b.

The servomotor with rotor position sensor has been located parallel with the rack bar.

X143603C01
3,2.698 3.25,2.281 3.25,2.281 3.417,2.281 true 2.26,3.198 2.427,3.198 2.427,3.198 2.677,2.781 true 1.104,2.76 1.417,2.917 0.313,0.156 10 false *a 3.5,2.208 3.813,2.365 0.313,0.156 10 false *b 5.802,2.042 6.115,2.198 0.313,0.156 10 false *c 3.792,4.167 4.104,4.323 0.313,0.156 10 false *d 2.021,3.125 2.333,3.281 0.313,0.156 10 false *e 5.771,3.885 6.083,4.042 0.313,0.156 10 false *a 0.219,4.552 0.531,4.708 0.313,0.156 10 false *f
*a Tie Rod *b Rolling Ball Screw
*c Torque Sensor *d Power Steering ECU
*e Rack Bar *f The illustrations shown are examples only.



c.

A variable sport steering rack bar is provided, with differing gear ratios along different portions of the bar.

i.

Around the center of the rack bar (steering angle 40° to 200°), the gear ratio is low, achieving a good steering feeling and straight-line dimensional stability at high speed.


ii.

The gear ratio at the ends of the rack bar (steering angle 200° and above) is larger, providing agility and low speed maneuverability.

X143591C01
1.031,1.115 1.198,1.115 1.198,1.115 1.448,1.531 true 0.833,1.031 1.146,1.188 0.313,0.156 10 false *1 1.99,3.469 2.302,3.625 0.313,0.156 10 false *a 4.063,3.469 4.375,3.625 0.313,0.156 10 false *b
*1 Rack Bar - -
*a Rack Bar Ends (Steering Angle 200° and above) *b Rack Bar Central Portion (Steering Angle 40° to 200°)