Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
NM3650E _55 Steering _082921 POWER ASSIST SYSTEMS _0400086 POWER STEERING SYSTEM DE DETAILS F

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  DETAILS  TORQUE SENSOR  


CONSTRUCTION


a.

Torque sensors are installed on the input side and output side of the torsion bar connecting the steering and pinion shafts.


b.

The torque sensor is based on the magnetoresistive principle, and detects the movement of the torsion bar via changes in the magnetic field, then converts this to a voltage signal and sends it to the power steering ECU. The power steering ECU uses these signals to calculate the necessary assist torque.